Woodstock SHOP FOX D4031 User Manual

Model d4031 mortising kit, Instruction sheet, Introduction

Introduction

The Model D4031 (

Figure 1) Mortising Kit provides every-

thing needed to produce mortises with your drill press.

Inventory

(Figure 2)

A. Cone .........................................................1

B. Fence Assembly ............................................1

C. Alignment Tool .............................................1

D. Mortising Chisels ...........................................4

E. T-Nuts .......................................................4

F. Mounting Sleeves:

2.945" OD x 2.600" ID ..................................1

2.600" OD x 2.366" ID ..................................1

2.366" OD x 2.170" ID ..................................1

G. Mounting Bushings:

2.600" OD x 2.000" ID ..................................1

2.600" OD x 1.880" ID ..................................1

2.600" OD x 1.570" ID ..................................1

H. Hold-Down Rods............................................2

I. Hold-Down ..................................................1

J. Adjustable Handle .........................................2

K. Rod ...........................................................1

Figure 1. Model D4031.

Figure 2. Inventory.

WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT

THE WRITTEN APPROVAL OF WOODSTOCK INTERNATIONAL, INC.

Printed in China

#13055JB

Unplug your drill press before installing this mortising

attachment. Failure to do so may result in serious

personal injury.

Model D4031

Mortising Kit

Instruction Sheet

Phone #: (360) 734-3482 • Online Tech Support: [email protected] • Web: www.shopfox.biz