Sirius Satellite Radio STARMATE ST1 User Manual
Page 25
Starmate ST1 User Guide
25
Signal Indicator
When using the optional Sirius Starmate Receiver
indoor, such as with the Home Docking Kit, it is
important to locate the antenna in an acceptable
location (See the individual installation guides for
more information).
1. Use the Channel Switch to highlight “Signal
Indicator”. Press SELECT.
2. Two 10 segment horizontal bar graphs will be
displayed ( SAT and TER) with a “-“ sign to the
left and a “+” sign to the right. SAT indicates
satellite signal and TER indicates terrestrial
signal – if available.
3. Adjust the antenna for greatest signal reception,
per the Home Docking Kit manual.
To exit this function, press SELECT or MENU.
_
+
SAT
TER
Signal Indicator
Confirm Tone Options
The Sirius Starmate Receiver will sound an Audio
“Tone” alert when the unit powers ON and OFF as
well as when the S-Seek Alert is activated. The
default is ON. To change the tone options, perform
the following:
1. From the Menu, use the Channel Switch to highlight
the “Confirm Tone”. Press SELECT.
2. Use the Channel Switch to Select “ON” or “OFF”.
Press SELECT to set the Tone Option.
To exit, push the MENU button.