Sirius Satellite Radio SR200 - Manual (Page 28)

22
Lock Options
Upon entering this mode for the first time, the user is prompted to enter the
default four digit numerical code. All future entries into this mode display a
channel list with the current channel in play highlighted. The NAVIGATION
WHEEL is used to navigate the list and highlight the channel to be locked or
unlocked. Once a channel has been highlighted, pressing the NAVIGATION
WHEEL displays the text Lock next to the channel and prevents the channel
from being accessible during any of the tuning modes. Locked channels can
be accessed only by direct channel number entry, at which time the user will
be prompted to enter the previously stored 4-digit code. Once the correct code
has been entered, the audio begins to play. The channel returns to the locked
status if the channel is changed or the vehicle/unit is turned off (or by
returning to this menu). Upon adding a channel, the text Lock is removed
from alongside the channel number/name.
Lock/Unlock Default Code Function
The first time the Lock/Unlock function is accessed, the user must enter the default lock code. The default lock
code is 0000. This code can be maintained or changed. To change the default lock code perform the following
procedure:
1. Press the MENU button to access the User Menu.
2. Rotate the NAVIGATION WHEEL to select the Lock Options.
3. Press the NAVIGATION WHEEL.
4. Rotate the NAVIGATION WHEEL to highlight Edit Code.
5. Press the NAVIGATION WHEEL.
6. Enter the default code 0000.
7. The New Code prompt will appear. Enter your new four digit code using the 0-9 number buttons. You will then
be prompted to confirm the new code by entering your code again.
8. The lock code is now changed.
Channel Lock Screen
Lock Options Screen