SIIG 04-0207A - Manual (Page 5)

5
To verify successful installation in Windows 2000:
1. Double click My Computer, Control Panel, System, Hardware,
and click Device Manager.
2. Click on the + (plus sign) in front of Ports (Com & LPT).
3. New Cyber port(s) should be listed.
DOS/Windows 3.1x:
1. Insert the Driver Installation diskette, from the C: prompt, type
in copy a:\dos\*.*, then press .
2. Type in edit autoexec.bat, then press .
3. Add C:\CB20XPC.exe at the bottom of the autoexec.bat file.
4. Go to File, save the changes and exit.
5. Remove the diskette and restart the system for the new setup to
take effect.