Sony DVP-NS700V - Manual (Page 78)

78
Custom Settings
(CUSTOM
SETUP)
Use this to set up playback related and other
settings.
Select “CUSTOM SETUP” in the Setup
Display. For details on using the display, see
“Using the Setup Display” (page 74).
The default settings are underlined.
x AUTO PLAY
Select the Auto Play setting when you turn on
the player.
x DIMMER
Adjusts the lighting of the front panel display.
x PAUSE MODE (DVD VIDEO/DVD-RW
only)
Selects the picture in pause mode.
x PLAYBACK MEMORY (DVD VIDEO/
VIDEO CD only)
The player can store the “SUBTITLE” and
other settings of each disc for up to 50 discs
(Playback Memory).
Set the Playback Memory function “ON” or
“OFF.”
The following settings are stored in memory
by the Playback Memory function.
— ANGLE (page 60)*
— AUDIO (page 54)*
— BNR (page 62)
— DIGITAL VIDEO ENHANCER (page 64)
— SUBTITLE (page 61)*
— VIDEO EQUALIZER (page 63)
∗
DVD VIDEO only
Notes
•
The player can store the settings of up to 50 discs.
When you store the setting of disc number 51, the
first disc setting is cancelled.
•
The Playback Memory function cannot be used for
DVD-RWs in VR mode.
•
During playback, do not turn off the player by
pressing POWER on the player. Doing so may
cancel the settings. When you turn off the player,
press x first to stop playback and then press [
/ 1 on
the remote. After the power indicator lights up in red
and the player enters standby mode, press POWER
on the player.
OFF Does not use “TIMER,”
“DEMO1,” or “DEMO2” to start
playback.
TIMER Starts playing when the player is
turned on. The player can start
playback at any time when
connected to a timer (not
supplied). Set the timer when the
player is in standby mode (the
power indicator lights up in red).
DEMO1 Starts playing the first
demonstration automatically.
DEMO2 Starts playing the second
demonstration automatically.
BRIGHT Makes the front panel display
bright.
DARK Makes the front panel display dark.
OFF Turns off the lighting of the front
panel display.
CUSTOM SETUP
AUTO PLAY:
DIMMER:
PAUSE MODE: OFF
BRIGHT
AUTO
ON PLAYBACK MEMORY:
OFF TRACK SELECTION:
OFF CD DIRECT:
AUTO The picture, including subjects
that move dynamically, is output
with no jitter. Normally select
this position.
FRAME The picture, including subjects
that do not move dynamically, is
output in high resolution.
ON Stores the settings in memory when
you eject the disc.
OFF Does not store the settings in
memory.