Socket Mobile Socket Wi-FI Products P500x - Manual (Page 5)

System Requirements
Note: For information about support for MontaVista Linux and Real-Time
Operating Systems (RTOS), please contact the Socket OEM Group at
www.socketmobile.com/contact
Minimum device requirements for Go Wi-Fi! E300, P300 or P300x
(SD cards):
• Windows Mobile 2003, 2003SE or 5.0
• Available SDIO slot
• For Windows Mobile 2003/2003SE, SDIO Now! software from
BSQUARE is required in ROM
• Software installation requires a host computer with either Windows
Vista or ActiveSync 4.0 or greater. Alternatively, advanced users can
install a CAB file.
Minimum device requirements for Go Wi-Fi! E500, P500 or P500x
(CF cards):
• Windows Mobile 2003, 2003SE or 5.0
• Available CF or PC Card slot (PC Card adapter required for PC slot)
• Software installation requires a host computer with either Windows
Vista or ActiveSync 4.0 or greater. Alternatively, advanced users can
install a CAB file.
• The Go Wi-Fi! E500 only connects to access points or radios that use
long preamble. Every 802.11b/g access point supports long preamble,
and most are configured this way by default.
Product Registration
Socket recommends that all customers register their Socket products.
Registered users receive the following benefits:
• Priority for technical support
• Special offers for future products and product upgrades
• The latest new product information
Register online at: www.socketmobile.com/support/support/new .
Software updates:
www.socketmobile.com/support/downloads
CHAPTER 1: INTRODUCTION 5