Sunpentown Intl Sunpentown Air Cooler SF-609 - Manual (Page 3)

3
Important Safety Notes
1. Make sure the correct power (120V/60 Hz) is supplied.
2. To avoid electric shock or personal injury, do not operate any appliance with a
damaged cord or plug or after the appliance malfunctions or has been damaged in
any manner. Return the unit to Sunpentown (see warranty) for examination, repair or
adjustment.
3. Unplug the appliance when not in use and before maintenance or servicing.
4. The applicable temperature to run this unit is between 32F-104F. Do not operate
when the temperature is above or below this range. Do not let unit sit under direct
sunlight.
5. When the tank is full, move unit from the side slowly to prevent water from spilling.
6. Do not place heavy objects on the machine.
7. Close supervision is necessary when any appliance is used by or near children.
8. When unplugging, pull from the plug and not on the cord.
9. Turn off the unit when adding water.
10. Turn off and unplug unit before cleaning.
11. To avoid excessive dampness, do not use the humidifying function for an extended
period of time in an area with poor circulation.
12. When not planning to use the unit for a long period of time, please unplug the power
cord, drain water, and store in a cool, dry place.
13. Please change water often to keep the water tank clean. It is recommended to
change the water once every 1 ~ 2 days.
Operation
Please fill the water tank as instructed below before turning on the unit.
Operating instructions:
1. ON/OFF button
Press once to turn ON unit, the “H” indicator light of “SPEED” mode will be on.
Press again to turn OFF unit.
2. SPEED button
When turned ON, the unit starts on High (the “H” indicator light is on), to adjust:
o Press once for Medium speed (the “M” indicator light is on)
o Press again for Low speed (the “L” indicator light is on)
o Press again for High speed with Sleep mode (the “H” and “SLEEP” indicator
lights are on). Unit will operate in High speed for 2 min, Medium speed for 1
min, and back to High for 2 min. and so on for approx. 30 minutes. After which
the unit will switch to operate in Medium speed for another 30 minutes and
finally switch to Low speed. Unit will run in Low speed until powered OFF.
o Press again for Medium speed with Sleep mode (the “M” and “SLEEP” indicator
lights are on). Unit will run in Medium speed for 2 min, Low speed for 1 min,
and back to Medium for 2 min. and so on for approx. 30 minutes. After which,
the unit will switch to Low speed and continues in Low until powered OFF.
o Press again for Low speed with Sleep mode (the “L” and “SLEEP” indicator
lights are on). Unit will operate in Low speed for 2 min, stop 1 min, and back to
Low for 2 min. and so on. Unit will continue to run in this mode until powered
OFF.
o There are total of six different settings to choose from.