SnapGear 2.0.1 User Manual
Page 29
Getting Started
25
Next, you must modify your PC’s network settings to enable it to communicate with the
CyberGuard SG appliance.
Click Start
->
Settings
->
Control Panel and double click Network Connections.
Right click on Local Area Connection (or appropriate network connection for the newly
installed PCI appliance) and select Properties.
Select Internet Protocol (TCP/IP) and click Properties.
Figure 2-7
Select Use the following IP address and enter the following details:
IP address:
192.168.0.100
Subnet mask:
255.255.255.0
Default gateway:
192.168.0.1
Select Use the following DNS server addresses and enter:
Preferred DNS server: 192.168.0.1