Smeg APL12-1 - Manual (Page 3)

User instructions
14
1. Description of the controls
1.1 Upper panel
All the dishwasher controls are grouped on the upper panel.
1
ON/OFF BUTTON
Pressing this button energises the appliance.
2
SELECTED PROGRAM INDICATOR LIGHTS
Illumination of this light denotes the program selected and the occurrence of
a fault (troubleshooting).
3
PROGRAM SELECTION BUTTON
By pressing this button in sequence it is possible to select the desired
program.
4
SALT WARNING LIGHT (certain models only)
Illumination of this light signals that salt container is empty.
5
RINSE AID WARNING LIGHT (certain models only)
Illumination of this light signals that rinse aid dispenser is empty.
6
HALF LOAD BUTTON (certain models only)
Pressing this button selects the HALF-LOAD function.
7
HALF LOAD INDICATOR LIGHT (certain models only)
Illumination of the light indicates selection of the HALF-LOAD function.
8
DELAYED START BUTTON (certain models only)
Pressing this button in sequence delays the start of the program by 3, 6 or 9
hours.
9
DELAYED START LIGHTS (certain models only)
Illuminate to show that start delayed by 3, 6 or 9 hours has been set.
SETTING THE WASHING PROGRAM AND SWITCHING ON
To select the most suitable program for the dishes to be washed refer to
the table below, which indicates the most appropriate program according
to dish type and degree of soiling.