Smeg DF410BL - Manual (Page 5)

User instructions
TABLE FOR CERTIFICATION BODIES
Reference standard EN 50242
Reference program ECO
Load 10 place-settings
Type of detergent B
Amount of detergent 25 g
Rinse aid setting Depending on the model 3/4 or 4/6
1.3 Washing programs
The dishwasher is equipped with a control panel and an INFORMATION
DISPLAY (8) from which it is possible to carry out all the power switch-
on, switch-off and programming operations.
Before starting a washing program make sure that:
•
The water supply tap is open.
• The correct amount of detergent has been added to the
dispenser.
• The baskets have been correctly loaded.
• The spray arms are able to rotate freely and without
obstruction.
• The dishwasher door is securely closed.
LIGHTING
Pressing the ON/OFF button (1) will start the dishwasher and will lit up
the dishwasher pilot light (6). After approximately 3 second from this
operation the DISPLAY (8) will be turned on with a visualization that will
depend upon the state of the dishwasher.