Shark EP709T - Manual (Page 4)

GETTING TO KNOW YOUR COMPACT CANISTER VAC
17
OPERATING INSTRUCTIONS
Motor Thermostat
Technical Specifications
Voltage: 120V., 60Hz.
Power: 10.8 Amps
2
1. Main Unit
2. Storage Compartment Release
Button
3. Storage Compartment Cover
4. Cord Rewind Button
5. On/Off Button
6. Full Bag Indicator
7. Extension Tubes (x2)
8. Upholstery Brush
9. Crevice Tool with Brush
10. Floor To Carpet Brush
11. Flexible Hose
12. Manual Suction Control
13. Hose Inlet
14. Parking Position Hook
15. Extension Tube Parking
Receptacle
16. Disposable Paper Bags
17. Air Driven Turbo Brush
Illustrations may differ from actual product.
7
Your vacuum cleaner includes a power cord,
which is automatically retractable. To
extend your power cord, pull from rear and
extend to desired length. A yellow mark on
the power cord shows the ideal cable length.
Don’t pull the power cord beyond the red
mark. When cleaning is finished, first switch
off power and disconnect plug from electrical
outlet. Then press on cord rewind button.
(Fig. 11) If the cord does not fully retract,
pull it out again and then press on cord
rewind button.
Power Cord
Fig. 11
Your vacuum cleaner has a tool storage
compartment. The upholstery brush and the
crevice tool with brush are stored here.
(Fig. 12)
Tool Storage
Important: This vacuum cleaner is
equipped with a motor protective
thermostat. If for some reason your
vacuum overheats, the thermostat will
automatically turn the unit off. Should
this occur, unplug the vacuum from the
wall outlet and turn off the switch.
Change the dust bag, clean the filters
and check for blockages in hose and
suction inlet. Allow the unit to cool for a
minimum of 45 minimum prior to
restarting the unit. To restart, re-plug
the vacuum into the wall socket and
turn the switch back on. Fig. 12