Star Trac S-RB - Manual (Page 14)

STAR TRAC UNIVERSAL TV BRACKET INSTALLATION
14
To install the TV on the bracket follows these steps:
Install your TV onto the bracket, by using a 3mm Hex
Allen Key to fasten (4) M4 socket head screws and (4)
washers, as shown.
And then, insert the tubing cap on the tube opening.
Step 1
If the mounting hole pattern on your TV is 75x75mm, you
have to install the VESA bracket (packed with hardware
kit) onto your TV with (4) M4 socket head screws, as
shown.
Step 2
Install your TV onto the VESA bracket with (4)
M4 ACORN nuts and (4) washers, as shown.
1. TV with 75x75mm mounting hole pattern:
2. TV with 100x100mm mounting hole pattern: