Shindaiwa Articulated Hedge AHS242 - Manual (Page 15)

15
Safe Operation
This machine is designed especially for
trimming hedges.
Never use this machine for any other
purposes. Never try to cut stones, met-
als, plastics or any other hard objects.
Using this Articulated Hedgetrimmer for
other purposes than trimming hedges
may damage the machine or cause
serious injury.
Before trimming:
■
Wear suitable protective clothing
and equipment. See the “Safety”
section for information.
■
Choose the best working position
for safety against the falling objects
(branches, etc.).
■
Never stand directly underneath the
branch you are cutting. Be aware of
falling branches. Note that a branch
may spring back at you after it hits
the ground.
NOTE:
Rest when you feel fatigued.
Working Position
■
Hold the shaft grip above the pow-
erhead with your right hand, and
the loop handle with your left hand.
■
Your left arm should be extended
to the most comfortable position.
Operator in working position
Right hand
on shaft grip
Hold the loop handle
with your left hand
WARNING!
Moving parts can amputate fingers or cause severe injuries. Keep hands, clothing and loose objects away from
all openings. Always stop engine, disconnect spark plug, and make sure all moving parts have come to a complete stop
before removing obstructions, clearing debris, or servicing unit.
WARNING!
Engine exhaust IS HOT, and contains Carbon Monoxide (CO), a poison gas. Breathing CO can cause uncon-
sciousness, serious injury, or death. Exhaust can cause serious burns. ALWAYS position unit so that exhaust is directed
away from your face and body.
WARNING!
Operation of this equipment may create sparks that can start fires. This unit is equipped with a spark arrestor
to prevent discharge of hot particles from the engine. Metal blade use also can create sparks if the blade strikes rocks,
metal, or other hard objects. Contact local fire authorities for laws or regulations regarding fire prevention requirements.