JVC HR-J455EA - Manual (Page 32)

32
EN
1 2 3
4 5 6
7 8 9
0
2
4
1
3
SPECIAL FEATURES
Control Your TV Using
Additional Buttons
Use the NUMBER keys, and the button, CANCEL
button or TIMER button to select the TV’s channel.
● With televisions under Code 01, 02, 03, 05, 07, 15, 16 or
22, the button corresponds to the 1-digit/2-digit entry
switching button (often labelled – /– –) of your TV’s remote
control.
● With televisions under Code 01, 08, 18 or 19, the CANCEL
button corresponds to the 10 + button, and the TIMER
button corresponds to the 20 + button of your TV’s remote
control.
NOTE:
The way these buttons are used is determined by your TV.
Use these buttons as instructed for your TV’s remote control.
SET TV BRAND CODE
1
Refer to the chart below. While holding down TV on
the recorder's remote control, enter your TV’s brand
code using the NUMBER keys, then press STOP.
Check if the TV's power goes off as it should. If it does,
try other operations (
੬
step 2)
● Once you have set the remote control to operate the
TV, you don't have to repeat this step until you
replace your remote control's battteries.
● SAMSUNG has two codes. If the TV does not
function with one code, try entering another.
OPERATE TV
2
First, press TV to set the remote control to TV mode, then
press the corresponding button:
, TV PROG +/–,
TV/VCR, TV VOL +/– (Volume), (Muting),
NUMBER keys.
● For some brands of TV, you must press OK after
having pressed the NUMBER keys.
IMPORTANT
Although the provided remote control unit is compatible with
JVC televisions, as well as many other models, it may not work
with your TV, or in some instances, may have limited function
capability.
TV Multi-brand Remote
Control
Your remote control can operate the basic functions of your TV set.
In addition to JVC TVs, other manufacturer’s TVs can also be
controlled.
Before you start . . .
● Turn on the TV using its remote control.
ATTENTION
The remote control can operate not only the video recorder
but also some of your TV's functions.
● To operate your video recorder, first press the VCR button
to set the remote control to the Video mode.
● To operate your TV, first press the TV button to set the
remote control to the TV mode.
TV BRAND NAME CODE
JVC 01
PANASONIC 02
SONY 03
SHARP 04
TOSHIBA 05
MITSUBISHI 06
HITACHI 07
SANYO 08
FUNAI 09
AIWA 10
DAEWOO 11
SAMSUNG 12, 16
LG/GOLDSTAR 13
THOMSON 14
FERGUSON 15
PHILIPS 16
GRUNDIG 17
ITT 18
MIVER 19
FINLUX 20
NOKIA 21
NEC 22
TV
NUMBER
TIMER
OK
VCR
CANCEL
STOP
TV PROG+/–
TV VOL+/–
TV/VCR