Remote controller – JVC KD-APD38 User Manual
Page 121
ENGLISH
5
Remote controller —
RM-RK50
Installing the lithium coin battery
(CR2025)
Aim the remote controller directly at the remote
sensor on the unit. Make sure there is no obstacle
in between.
Warning:
• Do not install any battery other than CR2025 or its
equivalent; otherwise, it may explode.
• Do not leave the remote controller in a place
(such as dashboards) exposed to direct sunlight
for a long time; otherwise, it may explode.
• Store the battery in a place where children cannot
reach to avoid risk of accident.
• To prevent the battery from over-heating,
cracking, or starting a fire:
– Do not recharge, short, disassemble, heat the
battery, or dispose of it in a fire.
– Do not leave the battery with other metallic
materials.
– Do not poke the battery with tweezers or
similar tools.
– Wrap the battery with tape and insulate when
throwing away or saving it.
Main elements and features
1
(standby/on/attenuator) button
• Turns the power on if pressed briefly or
attenuates the sound when the power is on.
• Turns the power off if pressed and held.
2
5
U (up) / D (down)
∞
buttons
• Changes the FM/AM bands with
5
U.
• Changes the preset stations with D
∞
.
• Changes the folder of the MP3/WMA discs.
• While listening to an Apple iPod.
– Pauses or resumes playback with D
∞
.
– Enters the main menu with
5
U.
(Now
5
U/D
∞
/
2
R/F
3
work as the menu
selecting buttons.)
*
3
VOL – / VOL + buttons
• Adjusts the volume level.
4
SOUND button
• Selects the sound mode (iEQ: intelligent
equalizer).
5
SOURCE button
• Selects the source.
*
5
U : Returns to the previous menu.
D
∞
: Confirms the selection.
CR2025
Continued on the next page
EN02-05KD-PDR35_001A_pre.indd 5
EN02-05KD-PDR35_001A_pre.indd 5
11/16/06 5:56:25 PM
11/16/06 5:56:25 PM