JBL CS1214T - Manual (Page 2)

2
INSTALLATION WARNINgS AND TIpS
THANK YOU for choosing
a JBL ® CS Series subwoofer
enclosure. These products have
been designed to deliver great
bass performance from a compact,
easily installed enclosure. To get
the best performance from your
enclosure, we strongly recommend
that installation be entrusted to a
qualified professional. Although
these instructions explain how to
install your product in a general
sense, they do not show specific
installation methods that may be
required for your particular vehicle.
If you do not have the necessary
tools or experience, do not attempt
the installation yourself. Instead,
please ask your authorized JBL car
audio dealer about professional
installation.
In order that we may better serve
you should you require warranty
service, please retain your
original sales receipt and serial
number.
WArNiNg: Playing loud music
in an automobile can permanently
damage your hearing as well as
hinder your ability to hear traffic.
We recommend listening at low
levels while driving. JBL accepts no
liability for hearing loss, bodily injury
or property damage resulting from
use or misuse of this product.
iNsTAllATiON Tips
• Always wear protective eyewear
when using tools.
• Turn off all audio components and
other electrical devices before
you start. Disconnect the (–)
negative lead from your vehicle’s
battery.
• Check clearances on both sides
of a planned mounting surface. Be
sure that screws or wires will not
puncture brake lines, fuel lines or
wiring harnesses, and that wire
routing will not interfere with the
safe operation of the vehicle.
• When making electrical
connections, make sure they are
secure and properly insulated.
• Before drilling or cutting holes,
use a utility knife to remove
unwanted fabric or vinyl, to keep
material from snagging in a drill
bit or saw.
• Do not mount speakers where
they will get wet.
• If a fuse must be replaced, be
sure to use the same type of fuse
and current rating as that of the
original.
CHOOsiNg A
MOUNTiNg lOCATiON
FOr ENClOsUrE
Choose a mounting location that
doesn’t interfere with cargo, the
fold-down rear seat or the trunk lid.
The best location is usually a corner
of the trunk or cargo area. Securely
mount enclosure to the mounting
surface, using the supplied material.
0098CSK - JBL Car CS1014T+CS1214T OM v4.indd 2 17/02/09 14:47:52