John Lewis JLTDH14 - Manual (Page 15)

4. Push down the unlock button on the
large mesh filter.
The large mesh filter pops up.
5. Take out fine filter.
6. Remove the fluff from fine filter. It is
best to use a damp hand for this
purpose.
Clean the entire filter area
The filter area does not have to be
cleaned after every drying cycle, but
should be checked regularly and cleaned
of fluff if necessary.
7. To do this, grip the top of the large
mesh filter and pull it forwards until it
comes loose from the two brackets.
8. Remove fluff from the entire filter area.
It is best to use a vacuum cleaner for
this purpose.
9. Press both journals of the large mesh
filter into the brackets on the loading
door until they snap into place.
10. Re-insert fine filter.
11. Press against the large mesh filter until it
locks into the interlock.
15