JVC HR-DD858E/EH - Manual (Page 18)

18
EN
– –:– –
1 2 3
4 5 6
7 8 9
0
2
4
1
3
PLAYBACK (cont.)
TimeScan
(HR-DD858E/EH only)
Your recorder is equipped with the TimeScan function. TimeScan
allows noise free pictures to be displayed on your TV screen in
the forward and reverse search modes. Audio will be played back
at normal speed during the TimeScan modes (
੬
pg. 19).
TimeScan allows you to view a programme in search mode while
listening to the audio.
NOTES:
● "TIME SCAN AUDIO" must be set to "ON", or the sound will
not be heard in TimeScan mode. (
੬
pg. 19)
● The audio will not synchronize with the video in TimeScan
modes.
● In Pause mode 3 seconds (approx.) of audio will be played
back repeatedly. (
੬
pg. 12)
● In TimeScan search modes some of the audio information will
not be played so that the audio can keep up with the video.
● Slow motion is not possible with TimeScan.
1 2 3 4 5
Audio signal during TimeScan
Sound of 1, 3 and 5 is heard.
Sound of 2 and 4 is not heard.
Output audio signal is normal (monaural) sound.
Playback tape
ACTIVATE VARIABLE-SPEED
SEARCH
1
During playback or still, turn the recorder's TIME SCAN
SHUTTLE ring. It remains at that position even after you
release it. Each time it passes a click position, the
playback speed changes.
(Refer to the chart on pg 19 for playback speeds).
OR
During playback, press or .
● The more times you press, the faster the playback
picture moves.
● To decrease speed, press the button for the opposite
direction.
(Refer to the chart on pg 19 for playback speeds).
To resume normal playback, press PLAY.
Variable-Speed Search
(HR-DD858E/EH only)
%
%
PLAY
PLAY
TIME SCAN SHUTTLE
If the picture jitters vertically during variable-speed
search:
1 Press PAUSE.
2 Press TV PROG + or – so that the vibration stops.