beautypg.com

Jura Capresso IMPRESSA X9 User Manual

Page 8

background image

8

3.4 Adding coffee beans

You have the possilility of using two different types of coffee
beans.

Ⅲ Remove the cover from the bean container (Fig. 3)
Ⅲ Clean out any dirt or foreign objects from the bean container.
Ⅲ Fill coffee beans into the bean container and replace the cover

again.

4. First use

Make sure to have filled the water tank and the bean tank.

Ⅲ Switch the IMPRESSA X9 on with the power switch on the rear

of the machine (Fig. 15/D).

Ⅲ Open the programming door on the front (Fig. 4) and switch the

IMPRESSA X9 on with the ON / OFF key (Fig. 5/A).

LANGUAGE

ENGLISH

Ⅲ Select a language of your choice by pressing the «+» or «–» key

(Fig. 5/F or L).

Ⅲ Press P to save your selection (Fig. 5/E).

CONFIRMED

TIME

HOURS

—:—

Ⅲ Set the hours by pressing the «+» or «–» key (Fig. 5/F or L).
Ⅲ Press P to save your setting (Fig. 5/E).

TIME

MINUTES

12:00

Ⅲ Set the minutes by pressing the «+» or «–» key (Fig. 5/F or L).
Ⅲ Press P to save your setting (Fig. 5/E).

CONFIRMED

WELCOME TO

PRESS RINSE

Ⅲ Press the Rinse key (Fig. 5/G).

SYSTEM FILLI

MACHINE HEAT

Ⅲ Place a cup under the height-adjustable dual spout (Fig. 6).

PRESS RINSE

Ⅲ Press the Rinse key (Fig. 5/G).

RINSING

When rinsing the machine, start with the coffee spout and
then move on to the two milk spouts.

5. Switching the machine on

Ⅲ Switch the IMPRESSA X9 on with the power switch on the rear

of the machine (Fig. 15/D).

Ⅲ Open the programming door on the front (Fig. 4) and switch the

IMPRESSA X9 on with the ON / OFF key (Fig. 5/A).

WELCOME TO

MACHINE HEAT

Ⅲ Place a cup under the height-adjustable dual spout (Fig. 6).

PRESS RINSE

Ⅲ Press the Rinse key (Fig. 5/G).

RINSING

When rinsing the machine, start with the coffee spout and
then move on to the two milk spouts.

6. Rinsing the machine

COFFEE READY

Ⅲ Press the Rinse key (Fig. 5/G).

RINSING

When rinsing the machine, start with the coffee spout and
then move on to the two milk spouts.

7. Setting the grinding degree

You can adjust the grinding gear to the roast of your coffee. We
recommend

a finer setting

Ǟ (for a lighter roast)

a coarser setting

Ǟ (for a darker roast)

Ⅲ To adjust the grinding degree, turn the setting rings to the

required position (Fig. 7).

Ⅲ You have the following options:

The smaller the dots, the finer the grind
The larger the dots, the coarser the grind

The grinding degree may only be adjusted while the grinding
gear is running.

8. Adjusting your machine to the water hardness

Water is heated in the machine. This leads to scale as a result of
use, which is automatically shown on the display. The machine
must be adjusted to match the hardness of the water used. For this,
please use the enclosed test stick.

1° German hardness is equivalent to 1.79° French hardness.

The machine can be adjusted from 1° German hardness up to 30°
German hardness. The function can also be deactivated.

The IMPRESSA X9 is preset to 16° German hardness. You can
adjust your machine to the local water hardness. Example:

COFFEE READY

Ⅲ Press P (Fig. 5/E) until you hear an acoustic signal.

HARDNESS

Ⅲ Press P again (Fig. 5/E) to activate the programming step.
Ⅲ Adjust the machine to the required water hardness by pressing

the «+» or «–» key.