Jwin JL-355 - Manual (Page 4)

Printed in China
OPERATIONAL INSTRUCTIONS
Setting the Clock
1. Press and hold TIME SET / MEM and the hour will flash.
2. Press TUNING + / - to find the correct hour setting.
3. Press TIME SET / MEM again the minute will flash.
4. Press TUNING + / - to find the correct minute setting.
Using the Radio
1. Press STANDBY to turn radio on.
2. Press SOURCE to select FM or AM mode.
3. Select your desired station using TUNING+ / -.
4. Turn the VOLUME CONTROL knob to adjust volume as needed.
5. Press STANDBY to turn radio off.
Wake to Radio
1. Repeatedly press ALARM 1 / 2 until “RADIO” icon appears on the
LCD screen to indicate alarm status
2. Press and hold ALARM 1 / 2 and hour will flash.
3. Select your desired wake up hour using TUNING+ / -.
4. Press ALARM 1 / 2 and minute will flash.
5. Select your desired wake up minute using TUNING+ / -.
Wake to Buzzer
1. Repeatedly press ALARM 1 / 2 until “BUZZER” appears on the LCD
screen to indicate alarm status
2. Press and hold ALARM 1 / 2 and hour will flash.
3. Select your desired wake up hour using TUNING+ / -.
4. Press ALARM 1 / 2 and minute will flash.
5. Select your desired wake up minute using TUNING+ / -.
Alarm Duration and Snooze Function
Alarm Duration – Buzzer alarm or Radio alarm will continue output for
60 minutes if no buttons are pressed, then it will stop automatically and
sound again at same alarm time the next day.
Snooze Function:
1. When the Alarm sounds, press SNOOZE to enable the snooze
function, Buzzer alarm or Radio alarm will stop.
2. The alarm will sound again in 9 minutes
3. Unless
STANDBY or ALARM 1 / 2 is pressed to stop the alarm,
the Snooze function will continue for up to 60 minutes from the
first alarm.