Jacuzzi Allusion 6636 - Manual (Page 2)

Technical Specifications
DImenSIonS
66” L x 36” W x 26” H
(1676 mm) L x (914 mm) W x (660 mm) H
DraIn/overflow
A: 18.4” (467 mm) B: 11” (279 mm)
CuTouT
Template Provided Part Number: DA08000
ToTal weIghT
1019 lb (462 kg) / 61.8 lb/ft
2 (302 kg/m 2 )
operaTIng gallonage
78 U.S. Gal. (295 Liters)
Min. 75 U.S. Gal . (284 Liters)
Max. 80 U.S. Gal. (303 liters)
proDuCT weIghT
180 lb (82 kg)
SkIrT mounTIng
Not Available
eleCTrICal SpeCIfICaTIonS
requires a dedicated gfCI protected separate circuit.
Motor/Pump: 120 VAC, 20 AMP, 60 Hz.
RapidHeat™: 120 VAC, 15 AMP, 60 Hz.
heaTer (STanDarD)
requires a dedicated gfCI protected separate circuit.
RapidHeat™: P/N S750000
© 2008 Jacuzzi Whirlpool Bath • 14880 Monte Vista Avenue • Chino, CA 91710 • www.jacuzzi.com
InSTallaTIon noTeS
Refer to installation instructions included with fixture before
beginning installation. Please confirm product availability and
specifications before commencing with any installation work.
PRODUCT SPECIFICATIONS AND AVAILABILITY ARE SUBJECT
TO CHANGE WITHOUT NOTICE.
#FR36000 01/08
Duetta
™
6636
whIrlpool baTh
ee50
Duetta™ 6636 Whirlpool Bath with Chromatherapy
Right Hand
ee55
Duetta™ 6636 Whirlpool Bath with Illumatherapy™
Right Hand
• Center Drain Location
• Accessories / Hardware:
TheraPro™ Jet Rings Kit: #D095
• Trim Kit Finishes Available:
(827) – Chrome
(898) – Brushed Chrome
(815) – Satin Nickel
(829) – Bright Brass
(805) – Platinum
(826) – Brushed Nickel
(845) – Oil Rubbed Bronze
11.04"
66"
36"
33"
3.84"
DUETTA 6636
13" x 4"
2"
Motor
Heater
12" H x 18"
L
Service Access
Opt. Service Access
END VIEW
H
W
SIDE VIEW
L
1/2"
DRAIN/OVERFLOW
A
B
product Shown: Duetta™ 6636 whirlpool bath
right hand Shown model: ee55
* Measurements inside unit represent cutout in
floor to allow for drain/overflow.
Minimum Service Access dimensions given.