JVC HR-DVS3EK - Manual (Page 12)

Filename [DVS3EK_1-EN.fm]
Masterpage:Left
12
Page 12 November 5, 2001 11:58 am
INSTALLING YOUR NEW RECORDER (cont.)
S-VIDEO Connection
8
To connect to a TV with S-VIDEO/AUDIO IN
connectors . . .
A
Connect the recorder to TV.
A Connect the aerial, recorder and TV as per “Basic
Connections” (
੬
pg. 11).
B Connect the recorder’s S OUT connector to the TV’s
S-VIDEO IN connector.
C Connect the recorder’s AUDIO OUT connectors to the
TV’s AUDIO IN connectors.
B
Connect the recorder to mains.
Plug the end of the mains power cord into a mains outlet.
NOTES:
● You can obtain high-quality S-VHS pictures.
● With S-VIDEO connection, you cannot use the Preset
Download function (
੬
pg. 14).
● If your TV is not stereo-capable, use the recorder’s AUDIO
OUT connectors to connect to an audio amplifier for Hi-Fi
stereo sound reproduction. (
੬
pg. 65)
● To operate the recorder with your TV using the S-VIDEO
connection, set your TV to its AV mode.
● For switching the TV’s mode, refer to the instruction manual of
your television.
S
OUT
SORTIE
ANTENNA
ANTENNE
IN
ENTREE
OUT
SORTIE
AUDIO
L
R
SAT CONTROL
CONTROLEUR SAT
OUT
SORTIE
AV2 (L-2) IN/DECODER
ENTREE/DECODEUR
AV1 (L-1)
IN/OUT
ENTREE/SORTIE
Back of TV
Aerial connector
S-VIDEO IN
connector
AUDIO IN connectors
S-Video cable
(not provided)
Audio cable
(not provided)
Mains outlet
Mains power cord
Back of recorder
RF cable (provided)
S OUT
AUDIO OUT
TV aerial cable
ANTENNA IN
ANTENNA OUT
After the connection is completed, perform “Auto Set
Up” on page 13.
DVS3EK_1-EN.book Page 12 Monday, November 5, 2001 1:43 PM