JVC AX-UXG6 - Manual (Page 16)

13
Operating the Sliding Panel
You can use the sliding panel to enable advanced operations
features provided for UX-G6R micro component system.
• Press OPEN/CLOSE button on the front panel (or PANEL
OPEN/CLOSE button on the remote control).
The sliding panel opens to uncover the inner buttons
behind the panel for further operations.
• Press OPEN/CLOSE button again.
The sliding panel automatically closes to hide the 10 inner
buttons.
Each time you press the button, the sliding panel opens and
closes repeatedly.
The buttons behind the sliding panel provided to control
various program settings such as playback, recording, and
presetting mode of each source. For details, refer to chapters
concerning to the particular unit.
When turning off the system
After pressing
button, the system closes sliding
panel as well as other CD tray and Tape tray
automatically if they are still opened.
MOS - FET
M I C R O
C O M P O N E N T S Y S T E M U X - G 6 R
OPEN/CLOSE
AUX
VOLUME
MUL TI
FM/AM
ST ANDBY/ON
JOG
Inner Buttons
OPEN/CLOSE
Continued
Listening to the External Equipment
You can listen to an external equipment such as MD recorder,
VCR, and other auxiliaries.
First make sure that the external equipment is properly
connected to the system (see page 7 and 9). For operation
of the equipment, refer to its Instructions.
1
Press AUX button to select an external source.
• To play an audio equipment without optical digital
output, select AUX so that the following information
appears in the display window.
2
Start playing back the external equipment.
3
Adjust the volume level to the desired listening
level.
4
Apply other sound effects, if you wish.
EN01-13.UX-G6R[B]/5 99.11.30, 16:06 13