beautypg.com

Before using for the first time, Installing the unit, Connecting to the analog output jacks – JVC XL-FZ258BK User Manual

Page 7: Connecting to the digital output jack

background image

Page 4

BEFORE USING FOR THE FIRST TIME

Best location

Select a location which is level, dry and neither too cold nor too hot
(temperature range 5°C (41°F) to 35°C (95°F)). Also, avoid dusty
locations or any location subject to vibration.

If interference occurs

If this unit is placed near a tuner or a radio receiver tuned to AM
frequencies, interference may occur. If this happens, we recommend
either that you move this unit as far away as possible from the tuner or
receiver or briefly turn off the power to this unit.

Installing the unit

Connecting to the Analog
Output Jacks

Connecting to an amplifier or receiver allows you to listen to the sound
from the speakers.
Connect the OUTPUT jacks of this unit to the line input jacks of an
amplifier or receiver with the supplied audio cord.

Notes
÷ Never connect the OUTPUT jacks to the PHONO jacks of the

amplifier or receiver. This may cause damage to the components.

÷ Make sure that the same channels are connected between this unit

and the amplifier or receiver: LEFT to LEFT and RIGHT to RIGHT.

÷ Do not connect the power plug until all connections are complete.

÷ Connect the plugs firmly. Loose connections may cause noise or

malfunction.

Speaker unit

Rear panel of this unit

Audio cord

Amplifier or receiver

RIGHT

LEFT

OUTPUT

SYNCHRO

COMPU LINK - 3

DIGITAL OUT

OPTICAL

AC IN

Connecting to the Digital
Output Jack

It is possible to transmit a digital sound signal from this unit directly to
a MD recorder,etc.

Notes
÷ Never connect the digital out put cable except to the digital input jack.

÷ An optical digital cord (optional) is required to make this connection.

Refer to the instruction manual of the MD recorder, etc. for details.

÷ There is a protective cap on the DIGITAL OUT jack (optical) . When

making the connection, pull off this cap and store it carefully in a safe
place. Should you undo the connection, replace the cap on the jack.

OPTICAL
DIGITAL
OUT

Optical digital cord (optional)

Rear panel of this unit

MD recorder, etc.(optional)

RIGHT

LEFT

OUTPUT

SYNCHRO

COMPU LINK - 3

RIGHT

LEFT

OUTPUT

DIGITAL OUT
OPTICAL

AC IN

XL-FZ258_J_4_p1-p15

06.6.19, 10:52 AM

4