Connections and installation – James Loudspeakers EMB User Manual
Page 7
LOW-LEVEL (LINE-LEVEL) CONNECTION - Install the supplied RCA type Y-
connector to both Low Level Left and Right Inputs of the subwoofer. Use a single
RCA cable to connect your subwoofer directly to the Subwoofer Out on your A/V
receiver or processor. Note: You may utilize the subwoofer Low-Level Outputs to
hook up a second subwoofer.
One of the features of James Loudspeaker subwoofers is that you have a number of
installation options. Please read the information in this section to determine which
installation option is best for your system.
Connections and Installation
HIGH-LEVEL (SPEAKER LEVEL) CONNECTIONS - You may choose to follow
Schematic A or B to connect your subwoofer using the High-Level Input terminals.
Use additional speaker wire as required for hook up. The schematic you select is a
matter of convenience as there will be no difference in performance between the
wiring options. Be sure to maintain correct polarity when making all connections:
Black (negative) to Black, Red (positive) to Red.
!! DO NOT USE BOTH THE LOW-LEVEL AND HIGH-LEVEL CONNECTIONS SIMULTANEOUSLY. !!
6
!! TURN OFF THE POWER TO YOUR ENTIRE SYSTEM PRIOR TO INSTALLATION !!