Jacuzzi Duetta EE60 - Manual (Page 2)

Technical Specifications
DImenSIonS
66” L x 42” W x 26” H
(1676 mm) L x (1067 mm) W x (660 mm) H
DraIn/overflow
A: 18.4” (467 mm) B: 11” (279 mm)
CuTouT
Template Provided Part Number: DA07000
ToTal weIghT
1106 lb (502 kg) / 57.5 lb/ft
2 (281 kg/m 2 )
operaTIng gallonage
93 U.S. Gal. (352 Liters)
Min. 90 U.S. Gal. (341 Liters)
Max: 95 U.S. Gal. (360 Liters)
proDuCT weIghT
EE60: TBD
EE65: 117 lbs (53 kg)
SkIrT mounTIng
Not Available
eleCTrICal SpeCIfICaTIonS
requires a dedicated gfCI protected separate circuit.
Motor/Pump: 120 VAC, 20 AMP, 60 Hz.
RapidHeat™: 120 VAC, 15 AMP, 60 Hz.
heaTer (STanDarD)
requires a dedicated gfCI protected separate circuit.
RapidHeat™: P/N S750000
© 2008 Jacuzzi Whirlpool Bath • 14880 Monte Vista Avenue • Chino, CA 91710 • www.jacuzzi.com
InSTallaTIon noTeS
Refer to installation instructions included with fixture before
beginning installation. Please confirm product availability and
specifications before commencing with any installation work.
PRODUCT SPECIFICATIONS AND AVAILABILITY ARE SUBJECT
TO CHANGE WITHOUT NOTICE.
#FR34000 01/08
Duetta
™
6642
whIrlpool baTh
ee60
Duetta™ 6642 Whirlpool Bath with Chromatherapy
Right Hand
ee65
Duetta™ 6642 Whirlpool Bath with Illumatherapy™
Right Hand
• Center Drain Location
• Accessories / Hardware:
TheraPro™ Jet Rings Kit: #D095
• Trim Kit Finishes Available:
(827) – Chrome
(898) – Brushed Chrome
(815) – Satin Nickel
(829) – Bright Brass
(805) – Platinum
(826) – Brushed Nickel
(845) – Oil Rubbed Bronze
11.04"
66"
42"
33"
3.84"
13" x 4"
2"
Motor
Heater
12" H x 18"
L
Service Access
Opt. Service
Access
END VIEW
H
W
SIDE VIEW
L
1/2"
DRAIN/OVERFLOW
A
B
product Shown: Duetta™ whirlpool bath
right hand Shown model: ee65
* Measurements inside unit represent cutout
in floor to allow for drain/overflow.
Minimum Service Access dimensions given.