Jensen JIMS-70I User Manual

Page 8

NOTE:

 When you first dock your iPod/iPhone, the unit will run an authentication

process, so it may not respond immediately to the SYNC button when pressed.
Wait for few seconds and try pressing the SYNC Button again

 An iPod /iPhone can only sync time up to the nearest minute; it’s possible to

have up to 59 seconds difference between the clock radio and synced
iPod/iPhone.

 The iPod internal clock is automatically updated when sync’d with iTunes. We

recommend you sync the iPod with iTunes prior to docking to JiMS-70i to make
sure you have the current time available.

 The iPhone receives constant updates from the phone service provider, so the

iPhone time will always be current.

 This JiMS-70i SYNC function does not support earlier iPod models, like iPod

mini, iPod 3G, 4G and iPod photo (4G /color display).

 The SYNC function can only be done when the JiMS-70i power is Off.

Switching to 24 Hour format
1.) With the current time showing, press and hold the SNOOZE/SLEEP/DIMMER

button until “12H” appears and flashes on the Display.

2.) Press

the or

buttons to switch to 24 hour format. After a few seconds

the display will resume to show current clock time.

DIMMER Function

With the JiMS-70i in standby mode, press the SNOOZE/SLEEP/DIMMER to
change the LED display brightness to High, Medium or Low.

RADIO OPERATIONS

TUNING THE RADIO

1.) Press

the

POWER/FUNCTION

button on the main unit to turn on the unit. The unit

will enter iPod mode. IPod is displayed.

2.) Press

the

FUNCTION button again to select the RADIO mode. The FM station

frequency will be displayed.

3.) Repeatedly

press

the

buttons until a station is received.

4.)

To automatically search for stations with strong signals, press and hold either

the

buttons. The tuner will stop on the first strong station signal it

finds. The frequency reading of the tuned station will be displayed and will

revert back to the current time after about 5 seconds.

5.)

Adjust the sound level by pressing the VOLUME+/ALARM1 or

VOLUME- /ALARM 2 buttons. The Volume Level reading will be displayed

and revert back to the current time after about 5 seconds.

Notes:
 Manual tune to select weaker stations that might be bypassed during the

automatic tuning.

 If the automatic tuning does not stop on the exact frequency of the station, for