JVC HR-J455EK - Manual (Page 5)

5
ENTREE/DECODEUR
IN/DECODER AV2 ENTREE/SORTIE
IN/OUT AV1
ENTREE
ANT. IN
SORTIE
RF OUT
ANTENNE
AV CONNECTION
To Connect To A TV with 21-pin AV input connector
(SCART) . . .
1– Connect the aerial, recorder and TV as per “RF
CONNECTION”.
2– Connect an optional SCART cable between the AV1 IN/OUT
socket on the rear panel of the recorder and the TV’s 21-pin
AV input connector (SCART).
STEP
2 INSTALLATION
CONNECT VIDEO RECORDER TO TV
Place the recorder on a stable, flat surface.
Make this connection if
your TV has a 21-pin AV
input connector (SCART)
in order to reduce the
possibility of interfer-
ence.
RF CONNECTION
To Connect To A TV With NO 21-pin AV input connector
(SCART) . . .
1– Disconnect the TV aerial cable from the TV.
2– Connect the TV aerial cable to the ANT. IN jack on the rear
panel of the recorder.
3– Connect the provided RF cable between the RF OUT jack
on the rear panel of the recorder and the TV’s aerial
connector.
Go to Step 3 – VIDEO CHANNEL SET AFTER YOU FINISH THIS STEP
ATTENTION
Ⅲ Do NOT Plug the mains power cord into a mains outlet until all connections are completed.
Ⅲ Do NOT press the
button on the recorder or on the remote control to turn on the recorder's
power before you start the Auto Set Up procedure described on page 8.
21-pin AV input connector (SCART)
Aerial connector
Back of TV
21-pin SCART Cable (not provided)
RF Cable (provided)
TV Aerial Cable
(not provided)
Mains Power
Cord
Back of Recorder
Mains outlet