Express timer programing – JVC HR-A47U User Manual

Page 24

TIMER RECORDING

You can directly program the VCR’s timer to record up to
8 broadcasts, as far as a year in advance. Remember, the
clock must be set before you can program the timer (

੬

pg. 8 or 10).

Load a cassette

Make sure the record safety tab is intact. If not,
cover the hole with adhesive tape, then load it
into the VCR.
● The VCR turns on, and the counter is reset,

automatically.

Access Program screen

Press PROG.. (If no
program is stored,
“PROGRAM 1”
appears.)

Set program start time

Press START +/–
repeatedly to enter the
time you want
recording to start.
● Press and hold START

+/– to increase the
time in 30-minute
intervals.

Set program stop time

Press STOP +/– repeatedly to enter the time you
want recording to stop.
● Press and hold STOP +/– to increase the time in

30-minute intervals.

Set program date

Press DATE +/–. (The current date is displayed on
the screen. The date you enter appears in its
place.)

Set channel number

Press CH +/–.
● Holding down CH +/– rapidly changes the

channel numbers.

● If you receive your programs through a cable

box, select the cable box output channel — the
channel on which you view the cable box
programs on the TV.

Express Timer
Programing

Turn on the VCR and the TV, and select the VCR
channel 3 or 4 (or AV mode) on the TV.

PROGRAM 1

START

STOP

8:00 AM

= – –:– –AM

DATE

– –/– –/– –

– – –

PRESS (+/–, SP/EP, 8=DAILY,

9=WEEKLY), THEN (0K)

PRESS (PROG.) TO END