beautypg.com

Electrical connections, Connecting the external components – JVC KD-S33 User Manual

Page 30

background image

2

Purple

Front speaker (left)

To the remote lead of other
equipment or automatic antenna if
any (200 mA max.)

Blue with white
stripe

Red

To an accessory terminal in
the fuse block

To a live terminal in the
fuse block connecting to the
car battery (bypassing the
ignition switch) (constant
12 V)

Yellow

*

2

To metallic body or
chassis of the car

Black

Ignition switch

*

1

Not supplied for this unit.

*

2

Before checking the operation of this unit prior to

installation, this lead must be connected, otherwise power
cannot be turned on.

*

3

Firmly attach the ground wire to the metallic body or to the

chassis of the car—to the place uncoated with paint (if
coated with paint, remove the paint before attaching the
wire). Failure to do so may cause damage to the unit.

*

4

Signal cord (not supplied for this unit).

15 A fuse

Fuse block

Rear speaker (left)

Rear speaker (right)

Front speaker (right)

White with black stripe

Line out

Rear ground terminal

Antenna
terminal

Set “L/O MODE” to “WOOFER”
(See page 14 of the INSTRUCTIONS.)

Rear speakers

Remote lead

Remote lead (blue with white stripe)

To the remote lead of other equipment
or automatic antenna if any

Y-connector

*

1

Front speakers

Subwoofer

Set “L/O MODE” to “REAR”
(See page 14 of the INSTRUCTIONS.)

Gray with black stripe

Green

Gray

Green with black stripe

Purple with black stripe

White

JVC Amplifier

ELECTRICAL CONNECTIONS

Typical connections

Connecting the external amplifiers and/or subwoofer

Make sure to disconnect the battery’s negative terminal.

• Be sure to ground this unit to the car’s chassis again after installation.

Note:

It is recommended to connect to the speakers with maximum power of more than 50 W (both at the rear and at the front, with an impedance of 4 Ω to 8 Ω).
If the maximum power is less than 50 W, change “AMP GAIN” setting to prevent the speakers from being damaged (see page 14 of the INSTRUCTIONS).

Heat sink

High

Connect only the front speakers if your
speaker system is two-speaker system.

PRECAUTIONS on power supply and speaker connections

JVC Amplifier

To external
component

JVC Amplifier

Front speakers

or

Connecting the external components

(A) JVC CD changer, SIRIUS Satellite radio, XM Satellite radio, Apple iPod®, or JVC D. player

Set “CHANGER” for the external input setting (See page14 of the INSTRUCTIONS.)

• For listening to the SIRIUS Satellite radio, connect a JVC DLP—Down Link Processor (separately purchased) to this unit.
• The iPod

*

5

or D. player (separately purchased) can be connected using an interface adapter (not supplied)—KS-PD100

(for iPod) or KS-PD500 (for D. player).

Connection 1 (integrated connection)

JVC DLP

Apple iPod

JVC D. player

JVC CD changer

Connection 2 (alternative connection)

JVC DLP

JVC CD changer

Apple iPod

JVC D. player

CD changer jack

• For listening to the XM Satellite radio, you can also connect XMDirect

TM

Universal

Tuner Box (separately purchased) through this unit using JVC Smart Digital Adapter—
XMDJVC100 (not supplied).

To CD changer, KS-PD100, or KS-PD500 if using Connection 1 (intergrated
connection)

XMDirect

TM

Universal Tuner Box

XMDJVC100

Antenna (supplied
with XMDirect

TM

Universal Tuner Box)

or

or

or

CAUTION:

Before connecting the external components, make sure that the unit is turned off.

*

5

iPod is a trademark of Apple Computer, Inc., registered in the U.S. and other countries.

*

6

Signal cord supplied with your JVC CD changer or DLP.

(B) JVC PnP (Plug and Play)

Set “EXT IN” for the external input setting (See page14 of the INSTRUCTIONS.)

You can also connect JVC PnP through this unit using JVC SIRIUS radio adapter, KS-U100K (not supplied).
• Turning on/off the unit can also turns on/off the JVC PnP.

Stereo mini plug

DC power plug

To DC IN jack

To headphones jack

CD changer jack

(C) Other external component

You can also connect an external component through this unit using Line Input Adapter, KS-U57 (not supplied) or AUX Input Adapter,
KS-U58 (not supplied).

3.5 mm stereo mini plug

Signal cord (not supplied for this unit)

CD changer jack

External

component

External

component

JVC PnP

or

or

or

JVC Amplifier

Front
speakers

Install_EN_KD-S33[J]f.indd 2

Install_EN_KD-S33[J]f.indd 2

7/3/06 9:48:57 AM

7/3/06 9:48:57 AM