JVC CA-MXK10R - Manual (Page 10)

7
Basic Operations
)
Turning the Power On and Off
Turning the System On
1 Press the
%
STANDBY/ON button.
The display comes on and “WELCOME” is displayed once.
The STANDBY indicator goes out.
The System comes on ready to continue in the mode it was in
when the power was last turned off.
• For example, if the last thing you were doing was listening
to a CD, you are now ready to listen to a CD again. If you
wish, you can change to another source.
• If you were listening to the Tuner last, the Tuner comes on
playing the station it was last set to.
Turning the System Off
1 Press the
%
STANDBY/ON button again.
“GOOD BYE” is displayed and the display goes out, except
for the clock display. The STANDBY indicator lights up. (The
display is dimmed.)
• Some power is always consumed even though power is
turned off (called Standby mode).
• To switch off the System completely, unplug the AC power
cord from the wall outlet. When you unplug the AC power
cord, the clock will be reset to 0:00 immediately.
ECO Mode (ECO)
The System has three energy modes; power on, power off (Stand-
by) and ECO. In ECO mode, the display goes off and the least
power is consumed.
To enter ECO mode, press the ECO button on the Unit in Stand-
by mode (while the STANDBY indicator lights up). “ECO
MODE” appears on the display, then the display goes off. The
STANDBY indicator remains lit.
To cancel ECO mode and turn on the power, press the
%
button for a second.
To cancel ECO mode and enter Standby mode, press the
ECO button again for a second.
Adjusting the Volume
Turn the VOLUME control on the Unit clockwise to increase the
volume or turn it counterclockwise to decrease the volume.
Press the VOLUME + button on the Remote Control to increase
the volume or press the VOLUME – button on the Remote Control
to decrease the volume.
You can set the volume level to MIN, 1-31, or MAX.
CAUTION:
• DO NOT turn on the System and/or start playing
any source without first setting the VOLUME
control to minimum, as a sudden blast of sound
could damage your hearing, speakers and/or
headphones.
For private listening
Connect a pair of headphones to the PHONES jack. No sound
comes out of the speakers.
Be sure to turn down the volume before connecting or putting on
headphones.
CD-R/RW PLAYBACK
3-CD
PLAY & EXCHANGE
ACTIVE
BASS EX.
EJECT EJECT
REC / PLAY B CD SYNCHRO RECORDING PLAY A FULL - LOGIC CONTROL
AUX CD TAPE FM
/ AM CD 3
CD 2
CD 1
COMPACT COMPONENT SYSTEM
1 BIT DUAL D/A
CONVERTER
PROGRAM
SOUND
MODE REPEAT
PANDOM
PRESET
TUNING
CANCEL
PHONES
REC START / STOP CD REC START DUBBING
SET
V O L U M E
DISC SKIP
R O C K
I CLASS C
P O P
/ DEMO
STANDBY/ON ECO STANDBY
CLOCK /TIMER TAPE A / B SELECT PTY / EON DISPLAY MODE
FM MODE FM /AM
AUX
SLEEP
STANDBY/ON
CD 1 CD 2 CD 3
SOUND
SELECT PTY/EON MODE DISPLAY
MODE
ACTIVE
BASS EX.
FADE MUTING
VOLUME
PROGRAM
/RANDOM REPEAT
TAPE A/B TAPE
CD
SOUND
MODE
ACTIVE
BASS EX.
VOLUME +,–
Numeric
keys
% STANDBY/ON
Display
STANDBY indicator
PHONES ACTIVE
BASS EX.
% STANDBY/ON
SOUND MODE
VOLUME
* When the System is in use, the display shows other items as well.
For simplicity, we show here only the items described in this section.
BASS
S.MODE
BASS indicator
Sound Mode indicator
Various information
Level bar Status bar (Indicates various statuses.)
FADE MUTING
ECO
STANDBY/ON
STANDBY STANDBY/ON ECO
or
STANDBY STANDBY/ON
STANDBY/ON
ECO
or
MX-K10R&MX-K30R(B).book Page 7 Wednesday, February 20, 2002 11:42 AM