JVC XL-PG59SL - Manual (Page 3)

4 3
4A / B XL-PG59SL / LVT0979-004A / B
p3
1
2
VOLUME
3 7
8 6 5
OPEN
4
/REMOTE
Track number in play
Elapsed playing time of
each track
R L
Label side.
Button Operation
To pause play
To stop play
To turn off the
unit
Fast forward/
reverse
Display/reference
Skip function
During play,
Search function
Keep depressed during play.
• Play stops automatically
when all the tracks have
been played.
For your reference:
“ ”
This indication appears if 3/8 is pressed when no disc is loaded
in the unit or if the disc is not properly seated.
“– –”
• Preparation period before playing the track
Flashes for several seconds after pressing 3/8 to play the disc.
“ ”
This indication appears when the lid is open.
Removing discs
Turn off the unit and, after the disc has stopped rotating, remove
the disc as shown below:
Auto power off function
If the unit is left in stop mode for 30 seconds, the unit turns
itself off automatically to prevent the batteries from running
down.
• To skip back to the previous track, quickly press 4
twice.
• During Program play, the button is used to fast for-
ward or back through the programmed sequence of
tracks.
• During Random play, the skip button cannot be used
to skip back to tracks that were played previously in
the random sequence.
During play,
During play,
In stop mode,
Press again to resume play.
Basic Play
This function has be
against sound inter
to enjoy listening to
This function is a
servo circuit and au
ahead of time (up to
Normally, the “AN
and the Anti-Shock
Anti-S
Other
y indicator
two “AA” (LR6) alka-
removing dry-cell
rechargeable bat-
batteries are almost out
e later.
will save the battery
-shock Protection EX”
zes during use,
the AC adaptor
nnect the power
Random play
You can play all trac
the unit stops.
During playbac
MODE
To cancel
Press MODE until “R
Notes:
• You can also selec
• During Program
B
Total number of tracks
Total playing time.
ANTI S
Stop mode
button (H.B.S)
ROG)
ns ( 4, ¢)
n ( 3/8)
VOL)
utton ( 7)
D 3)
E)
Reverse Forward
(repeatedl
Insert the plug in the
indicated direction. The
plug cannot be inserted
opposite direction.
Unless otherwise noted, the remote control unit’s buttons are used in the following explanation.
Note that the unit’s button with the same mark works equally to the remote control’s button.
Follow the steps in the numerical order.
Note:
In step 1, firmly connect the plug into the jack.
Otherwise, the display may not show the correct contents.
6/25/03, 1:39 PM