Jet Tools DC-650C - Manual (Page 6)

6
Introduction
This manual is provided by JET covering the safe operation and maintenance procedures for models
DC-650 Series Dust Collectors. This manual contains instructions on installation, safety precautions, general
operating procedures, maintenance instructions and parts breakdown. This machine has been designed and
constructed to provide years of trouble free operation if used in accordance to instructions set forth in this
manual. If there are any questions or comments, please contact either your local supplier or WMH Tool Group.
Specifications
DC-650 Series Dust Collector
Model ...................................................................................DC-650A/ARC........................................ DC-650C/CRC
Stock Number ...............................................................708640/708640RC............................... 708640C/708641RC
Blower Wheel Diameter ........................................................................9.5”.......................................................... 9.5"
Sound Rating at 3 feet ................................................................. 65-70 dB..................................................65-70 dB
Hose Diameter .........................................................................................4"............................................................. 4"
Bag Diameter .........................................................................................14”........................................................... 14"
Filter and Collector Bag Length .................................................31.5”/21.6”........................................................ 33.5”
Collector Bag Capacity (cu ft): ............................................................... 2.1........................................................... 2.1
Air Flow @ 4” (CFM): ............................................................................ 650.......................................................... 650
Max. Static Pressure (inch of water):..................................................... 6.5........................................................... 6.5
Velocity @ 4” (FPM):.......................................................................... 6,300....................................................... 6,300
Overall Dimensions:...........................................................26.4”x14”x56.7”.............................26-1/2” x 14” x 61-1/2”
Motor (TEFC): ............................... 1 HP, 1Ph, 115V/230V, Prewired 115V......1 HP, 1Ph 115/230V, Prewired 115V
Net Weight (lbs): ..................................................................................... 69............................................................ 84
Gross weight (lbs): .................................................................................. 74............................................................ 87
The above specifications were current at the time this manual was published, but because of our policy of
continuous improvement, WMH Tool Group reserves the right to change specifications at any time and without
prior notice, without incurring obligations.