Jacuzzi Tirage Plus PORTABLE WHIRLPOOL SPA - Manual (Page 21)

PROBABLE CAUSE REMEDY PROBLEM
18
10. Motor will not start.
(Continued)
H. Subnormal voltage.
I. Locked shaft or impeller.
J. Motor windings burned out.
K. Defective starting switch inside
motor.
H. Call an electrition or your power com-
pany.
I. *
J. *
K. *
11. Motor stops. A. Motor overload condition.
B. Selector switch failure.
C. Relay failure.
D. Inadequate supply wiring.
E. High temperature safety
switch tripped.
A. Let cool for one hour. Motor overload will
reset; if problem persists, see *Note.
B. *
C. *
D. Consult electrician to correct wiring to
unit.
E. Reset button on heater after water has
cooled; see *Note if switch continues to
trip.
12. Air Blower does not operate. A. Power off.
B. ACCESSORY switch in OFF.
C. House circuit breaker tripped,
no power to system.
D. GFCI tripped.
E. Faulty motor.
A. Turn on power at service panel.
B. Select other function.
C. Reset circuit breaker.
D. Reset GFCI.
E. *
*Note: The skills and tools necessary for the safe repair of this spa require the services of qualified
service personnel. Contact your Jacuzzi Whirlpool Bath Authorized Service Agent or Dealer.
TROUBLESHOOTING GUIDE