Jabra BT2045 - Manual (Page 9)

8
en
g
li
sh
Jabra bT2045
What the lIGhts mean
What you see What that means
solid light In pairing mode - see Paring
section .
Very slow single flash connected to phone and in
standby mode .*
slow triple flash not connected to phone and in
standby mode .*
regular double flash active on call
Quick double flash Incoming/outgoing call
Quadruple flash battery low
* bT2045 is equipped with Jabra discreet light feature, meaning
that light indicator (led) turns off after 1 min of non-activity .
headset is still active, and light will flash again after a tap on the
answer/end button or any call activity .
troubleshootInG & faQ
I hear crackling noises
- for the best audio quality, always wear your headset on the
same side of the body as your mobile phone .
I cannot hear anything in my headset
- Increase the volume on your phone .
- ensure that the headset is paired with the phone .
- make sure that the phone is connected to the headset – if it
does not connect either from the phone’s menu or by tapping
the answer/end button, follow the pairing procedure (refer to
pairing section in this user manual) .
- you can determine whether your headset is connected to a
device by looking at the flashes on the headset after tapping
the answer/end button when the headset is on very slow
single flashes means that the headset is connected to a device,
slow triple flashes means that the headset is currently not
connected .