Jacuzzi Mito DZ95 - Manual (Page 2)

Mito
™
6
Salon™ Spa Bath
technical Specifications
DiMenSionS
72” L
† x 42” W x 21-1/2” H
(1829 mm) L x (1067 mm) W x (546 mm) H
(
† Add 1/4” to this dimension when roughing-in for 3-wall niche.)
Drain/overflow
A: 17-1/2” (445 mm) B: 11-7/8” (302 mm)
Cutout
70” (1778 mm) x 40” (1016 mm)
total weight
1197 lb (543 kg) / 57 lb/ft
2 (278 kg/m 2 )
operating gallonage
73 U.S. Gal. (288 Liters)
proDuCt weight
155 lb (70 kg)
Skirt Mounting
Not Available
eleCtriCal SpeCifiCationS
requires a dedicated gfCi protected separate circuit.
Blower: 120VAC, 20AMP, 60 Hz.
Motor/Pump and Optional RapidHeat™: 240VAC, 20AMP, 60 Hz.
heater (optional)
requires a dedicated gfCi protected separate circuit.
RapidHeat™: P/N S750000
© 2007 Jacuzzi Whirlpool Bath • 14880 Monte Vista Avenue • Chino, CA 91710 • www.jacuzzi.com
inStallation noteS
Refer to installation instructions included with fixture before
beginning installation. Please confirm product availability and
specifications before commencing with any installation work.
PRODUCT SPECIFICATIONS AND AVAILABILITY ARE SUBJECT
TO CHANGE WITHOUT NOTICE.
#FR72000 01/08
DZ95 Mito© 6 Salon™ Spa, Right Hand
• Center Drain Location
• Accessories / Hardware:
Trip-Lever Drain Kit #X559
Rotary Drain Kit, 26” Cable #8730
HTC Jet Trim Kit: #D095
2 X BMH Jet Trim Kit: #J869
• Trim Kit Finishes Available:
(827) – Chrome
(898) – Brushed Chrome
(815) – Satin Nickel
(829) – Bright Brass
(805) – Platinum
(826) – Brushed Nickel
(849) – Oil Rubbed Bronze
36"
42"
72"
11-7/8
"
10" x 4"
2"
Motor
12" H x 24" L
Service Access
Opt. Service
Access
5-3/8"
Blower
Optional Heater
END VIEW SIDE VIEW
72"
2"
(51 mm)
(Optional Heater)
42"
21-1/2"
(Blower)
(Motor)
(Optional
Heater)
DRAIN/OVERFLOW
A
B
product Shown: Mito © 6 Salon™ Spa right hand
Shown Model: DZ95
* Measurements inside unit represent cutout in
floor to allow for drain/overflow.
Minimum Service Access dimensions given.