Specifications – JVC KD-R316 User Manual
Page 28
24
ENGLISH
Specifications
AUDIO AMPLIFIER SECTION
Maximum Power Output:
Front/
Rear:
50 W per channel
Continuous Power Output (RMS):
Front/
Rear:
19 W per channel into 4 Ω, 40 Hz to
20 000 Hz at no more than 0.8% total
harmonic distortion.
Load Impedance:
4 Ω (4 Ω to 8 Ω allowance)
Tone Control Range:
Bass:
±12 dB (60 Hz, 80 Hz, 100 Hz, 200 Hz)
Q1.0, Q1.25, Q1.5, Q2.0
Middle:
±12 dB (0.5 kHz, 1.0 kHz, 1.5 kHz, 2.5 kHz)
Q0.75, Q1.0, Q1.25
Treble:
±12 dB (10.0 kHz, 12.5 kHz, 15.0 kHz,
17.5 kHz)
Q (Fixed)
Frequency Response:
40 Hz to 20 000 Hz
Signal-to-Noise Ratio:
70 dB
Line-Out Level/Impedance:
Except
KD-R35:
2.5 V/20 kΩ load (full scale)
Subwoofer-Out Level/Impedance:
Except
KD-R35:
2.5 V/20 kΩ load (full scale)
Output Impedance:
1 kΩ
Other Terminal:
• AUX (auxiliary) input jack, Aerial input
• For KD-R412/KD-R411: Steering wheel remote
input, USB input Jack
• For KD-R35: USB input Jack
TUNER SECTION
Frequency Range:
FM:
87.5 MHz to 108.0 MHz
AM:
MW:
522 kHz to 1 620 kHz
LW:
144 kHz to 279 kHz
FM Tuner:
Usable Sensitivity:
9.3 dBf (0.8 μV/75 Ω)
50 dB
Quieting Sensitivity:
16.3 dBf (1.8 μV/75 Ω)
Alternate Channel
Selectivity (400 kHz):
65 dB
Frequency Response:
40 Hz to 15 000 Hz
Stereo Separation:
40 dB
MW Tuner:
Sensitivity:
20 μV
Selectivity:
40 dB
LW Tuner:
Sensitivity:
50 μV
EN18-25_KD-R412_003A_4.indd 24
EN18-25_KD-R412_003A_4.indd 24
10/12/09 9:59:27 AM
10/12/09 9:59:27 AM