JVC RX-668RBK - Manual (Page 19)

16
English
If there is a station broadcasting the program
you have selected
The receiver changes the source (all sources except AM – MW/
LW), and tunes in the station. The indicator of received PTY
code starts flashing.
When the program is over, the receiver goes back to the
previously selected source, but still remains in EON standby
mode. The indicator of received PTY code stops flashing and
remains lit.
CASE 2
Switching to a Broadcast Program of
Your Choice Temporarily
Another convenient RDS service is called “EON (Enhanced Other
Network).”
The EON indicator lights up while receiving a station with the EON
code.
This allows the receiver to switch temporarily to a broadcast
program of your choice (NEWS, TA, and/or INFO) from a different
station except in the following cases:
• When you are listening to non-RDS stations (all AM — MW/LW
and some FM stations).
• When the last received FM station is a non-RDS station.
• When the receiver is in standby mode.
Before you start, remember...
• The EON function is only applicable to preset stations only.
On the front panel ONLY:
1. Press EON so that the last selected
program type appears on the
display.
The receiver enters EON standby mode. When the receiver is in
EON standby mode, the receiver is ready to receive the EON
data (TA/NEWS/INFO) you select.
2. Press TA/NEWS/INFO until the
program type you want appears on
the display.
• Each time you press the button, the display changes to show
the following:
TA: Traffic Announcement in your area.
NEWS: News.
INFO: Program the purpose of which is to impart advice in
the widest sense.
If there is no station broadcasting the program
you have selected
The receiver continues playing the current source (all sources
except AM – MW/LW).
When a station starts broadcasting the program you have
selected, the receiver automatically switches to the station. The
indicator of received PTY code starts flashing.
When the program is over, the receiver goes back to the
previously selected source, but still remains in EON standby
mode. The indicator of received PTY code stops flashing and
remains lit.
‘
If the FM station you are listening to is
broadcasting the program you have selected
The receiver continues to receive the station, but the indicator
of received PTY code starts flashing.
When the program is over, the indicator of received PTY code
stops flashing and remains lit, but the receiver remains in EON
standby mode.
CASE 3
‘
To stop listening to the program selected by EON
Press EON so that the program type (TA/NEWS/INFO) indicator
goes off from the display. The receiver enters EON off mode and
goes back to the previously selected source.
• Each time you press EON, the EON mode alternates between
standby mode and off mode.
Notes:
• EON data sent from some stations may not be compatible with this
receiver.
• In EON standby mode, if you change the source to AM (MW/LW) or
if you carry out synchronized recording (see page 27), EON
standby mode is canceled temporarily. The receiver goes back to
EON standby mode again when you have finished that operation.
• While listening to a program tuned in by the EON function, you
cannot use source selecting buttons and PTY SEARCH button.
• While listening to a program tuned in by the EON function, you
cannot perform the on-screen operations (pages 23 and 29).
CAUTION:
When the source alternates intermittently between the station tuned in
by the EON function and the currently selected source, press EON to
cancel the EON function.
If you do not press the button, the currently tuned station is received
finally, and the indication of the EON program type flashing on the
display disappears.
EON
TA/NEWS/INFO
TA NEWS/INFO TA/INFO
NEWS TA/NEWS/INFO INFO
TA/NEWS
‘
CASE 1
‘
EN08_22.RX-668R[E]/2 99.1.28, 1:14 PM 16