Timer operations, English, Setting the timer – JVC UX-P450 User Manual
Page 84
31
English
Timer Operations
Setting the Timer
Using Daily Timer, you can wake up with your favorite
song. On the other hand, with Recording Timer, you can
make a tape of a radio broadcast automatically.
• You can store three Daily Timer settings and one
Recording Timer setting; however, you can activate only
one of Daily Timers and Recording Timer at the same time.
• To exit from the timer setting, press CLOCK/TIMER as
required.
• To correct a misentry during the process, press CANCEL.
You can return to the previous step.
1
Select one of the timer setting modes you want to set—
Daily 1 ON time, Daily 2 ON time, Daily 3 ON time, or
Recording Timer ON time.
2
Make the timer setting as you want.
Repeat the following operations until you finish setting in
the following order—
For Daily Timers:
1
Set the hour then the minute for on-time.
2
Set the hour then the minute for off-time.
3
Select the playback source—“TUNER FM,”
“TUNER AM,” “TAPE,” “DISC,” or “AUX.”
4
For “TUNER FM” and “TUNER AM”: Select a
preset channel.
For “DISC”: Select the title/group number, then
the chapter/track number.
CANCEL
STANDBY/ON
CLOCK/
TIMER
SET
,
Remote control
* Daily Timer initial settings when shipped from the
factory
• DAILY 1:ON Time (6:00)/OFF Time (8:00)/
Source (TUNER FM 1)/Volume level (– –)
• DAILY 2:ON Time (12:00)/OFF Time (14:00)/
Source (TUNER FM 1)/Volume level (– –)
• DAILY 3:ON Time (18:00)/OFF Time (20:00)/
Source (TUNER FM 1)/Volume level (– –)
Remote
ONLY
CLOCK/
TIMER
DAILY 1
* ON (Time)
ON (Time)
ON (Time)
ON (Time)
DAILY 2
*
DAILY 3
*
REC TMR
Clock setting
(see page 17)
Canceled
Daily 1 Timer
Daily 2 Timer
Daily 3 Timer
Recording Timer
1
Ex. When Daily Timer 1 setting mode is selected
SET
1
Timer.fm Page 31 Tuesday, June 1, 2004 10:41 AM