Jacuzzi Elara DX70 - Manual (Page 2)

Technical Specifications
DimenSionS
60” L x 42” W x 26” H
(1524 mm) L x (1067 mm) W x (660 mm) H
Drain/overflow
A: 18-1/2” (470 mm) B: 9.6” (244 mm)
CuTouT
58” (1473 mm) x 40” (1016 mm) & undermount template DQ50000
ToTal weighT
942 lb. (427 kg) / 54 lb/ft
2 (263 kg/m 2 )
operaTing gallonage
88 U.S. Gal. (333 Liters)
Min. 83 U.S. Gal. (314 liters)
Max. 92 U.S. Gal. (348 liters)
proDuCT weighT
170 lb. (77 kg)
SkirT mounTing
Not Available
eleCTriCal SpeCifiCaTionS
requires a dedicated gfCi protected separate circuit.
Blower: 120VAC, 20AMP, 60 Hz.
Motor/Pump and RapidHeat™: 240VAC, 20AMP, 60 Hz.
heaTer (STanDarD)
requires a dedicated gfCi protected separate circuit.
RapidHeat™: P/N BN60000
© 2008 Jacuzzi Whirlpool Bath • 14880 Monte Vista Avenue • Chino, CA 91710 • www.jacuzzi.com
inSTallaTion noTeS
Refer to installation instructions included with fixture before
beginning installation. Please confirm product availability and
specifications before commencing with any installation work.
PRODUCT SPECIFICATIONS AND AVAILABILITY ARE SUBJECT
TO CHANGE WITHOUT NOTICE.
#FR97000 01/08
elara
™
6042
Salon ™ Spa
DX70
Elara™ 6042 Salon™ Spa with Chromatherapy —
Right Hand
• Right Hand Drain Location
• Accessories / Hardware:
TheraPro™ Jet Rings Kit: #D095
AccuPro™ 2 Jet Rings Kit: # J869
Sch 40, Rotary Drain Kit: #DA34
• Trim Kit Finishes Available:
(827) – Chrome
(898) – Brushed Chrome
(815) – Satin Nickel
(829) – Bright Brass
(805) – Platinum
(826) – Brushed Nickel
(845) – Oil Rubbed Bronze
60"
42"
21"
4.2"
9.6"
12" x 4"
2"
Heater
Motor
Opt. Service
Access
12" H x 24" L
Service Access
Blower
Elara™ 6042,
Right Hand
42"
END VIEW
26"
SIDE VIEW
1/2"
(13 mm)
(Motor)
(Inlet Heater)
(Blower)
60"
DRAIN/OVERFLOW
A
B
product Shown: elara™ 6042 Salon™ Spa with
Chromatherapy right hand model: DX70
* Measurements inside unit represent cutout in
floor to allow for drain/overflow.
Minimum Service Access dimensions given.