Jonsered BC 2125 - Manual (Page 29)

English – 29
TECHNICAL DATA
Technical data
Note 1: Equivalent noise pressure level is calculated as the time-weighted energy total for noise pressure levels under various
working conditions with the following time distribution: 1/2 idle and 1/2 max. speed.
NOTE! Noise pressure at the user’s ear and vibration on the handles are measured with all the machine’s approved cutting
equipment fitted. The table indicates the highest and lowest values.
Technical data BC 2125
Engine
Cylinder displacement, cu.in/cm 3 1,50/24,5
Cylinder bore, inch/mm 1,26/32
Stroke, inch/mm 1,06/27
Idle speed, rpm 2700
Recommended max. fast idle speed, rpm 11000-11700
Speed of output shaft, rpm 8014
Max. engine output, acc. to ISO 8893, kW/ rpm 0,9/9000
Catalytic converter muffler No
Speed-regulated ignition system Yes
Ignition system
Manufacturer/type of ignition system WalbroMB/SEM AM49
Spark plug NGK BPMR 7A/Champion RCJ 7Y
Electrode gap, inch/mm 0,02/0,5
Fuel and lubrication system
Manufacturer/type of carburetor Zama C1Q
Fuel tank capacity, US pint/litre 1,06/0,5
Weight
Weight without fuel, cutting attachment and guard, Lbs/kg 9,9/4,5
Sound levels
(see note 1)
Equivalent sound pressure level at the user′s ear,
measured according to ANSI B175.3-1997, dB(A), min/
max:
91/97
Vibration levels
Vibration levels at handles, measured according to ANSI
B175.3-1997, m/s
2
At idle, left/right handles, min.: 1,1/1,0
At idle, left/right handles, max.: 1,6/1,9
At max. speed, left/right handles, min.: 1,5/1,3
At max. speed, left/right handles, max.: 5,5/3,5
Approved accessories Type Cutting attachment guard, Art. no.
Centre hole in blades/cutters, Ø 25,4 mm
Arbor shaft thread M10
Saw blade Opti S 200-26 (Ø 200 26 teeth)
Grass blade/grass cutter Grass 255-4 1" (Ø 255 4-teeth) 503 93 42-04
Grass 255-8 1" (Ø 255 8-teeth) 503 93 42-04
Trimmer head Tap-N-Go Pro 503 93 42-04 / 503 97 71-03
Trimmy H II 503 93 42-04 / 503 97 71-03
Tap-N-Go 35 503 93 42-04 / 503 97 71-03
S35 503 93 42-04 / 503 97 71-03
Auto32 503 93 42-04 / 503 97 71-03
Tap-N-Go 25 (L) 503 93 42-04 / 503 97 71-03
Plastic blades Polytrim 503 93 42-04