JVC KD-G320 - Manual (Page 52)

20
ENGLISH
Main elements and features
1 (standby/on attenuator) button
• Turns the power on if pressed briefly or
attenuates the sound when the power is
on.
• Turns the power off if pressed and held.
2 SRC (source) button
• Selects the source.
3 R (reverse) / F (forward) buttons
• Searches for stations (or services) if
pressed briefly.
• Searches for ensembles if pressed and
held.
• Fast-forwards or reverses the track if
pressed and held.
• Changes the tracks if pressed briefly.
• While listening to an Apple iPod or a
JVC D. player (in menu selecting mode):
– Selects an item if pressed briefly.
(Then, press D (down) to confirm the
selection.)
– Skips 10 items at a time if pressed and
held.
4 SOUND button
• Selects the sound mode (C-EQ: custom
equalizer).
Remote controller —
RM-RK60
This unit can be remotely controlled as
instructed here (with an optionally purchased
remote controller). We recommend that you
use remote controller RM-RK60 with your unit.
Installing the lithium coin battery
(CR2025)
Aim the remote controller directly at the
remote sensor on the unit. Make sure there is
no obstacle in between.
Warning:
• Do not install any battery other than
CR2025 or its equivalent; otherwise, it may
explode.
• Store the battery in a place where children
cannot reach to avoid risk of accident.
• To prevent the battery from over-heating,
cracking, or starting a fire:
– Do not recharge, short, disassemble, heat
the battery, or dispose of it in a fire.
– Do not leave the battery with other
metallic materials.
– Do not poke the battery with tweezers or
similar tools.
– Wrap the battery with tape and insulate
when throwing away or saving it.
Caution:
EN16-23KD-G421[EX_EU]f.indd 20 EN16-23KD-G421[EX_EU]f.indd 20 11/22/05 5:45:20 PM 11/22/05 5:45:20 PM