JVC KT-SR3000 User Manual

Page 25

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○

Then the S-Seek Alert List screen which displays the
current matches appears.

• Press CH

5 / ∞ (or CH + / –) to select an entry

on the S-Seek Alert List screen, then press SEL
(or SELECT).

Note: If no operation is done for about 10
seconds, your JVC PnP automatically exits from
the S-Seek Alert List screen.

To delete or deactivate the PDT for S-Seek

1. Press and hold MEMO (memory) for about 3

seconds.
The most newly stored PDT appears on the display.

2. Press CH

5 / ∞ (or CH + / –) repeatedly to select

an unnecessary PDT, then press SEL (or SELECT).
The following screen appears.

3. Press CH

5 / ∞ (or CH + / –) to select either

“Delete” or “S-Seek”, then press SEL (or
SELECT).
• Delete: To delete an unnecessary PDT.

After pressing SEL (or SELECT), the Delete
Confirmation screen appears.
– Select “Yes” (to delete) or “No” (to cancel

deletion) by using CH

5 / ∞ (or CH + / –) and

then SEL (or SELECT).

• S-Seek: To deactivate the PDT for S-Seek

function.
After pressing SEL (or SELECT), the S-Seek
Setting screen appears.
– Select “Off” (to deactivate the PDT for S-Seek)

or “On” (to activate the PDT for S-Seek) by
using CH

5 / ∞ (or CH + / –) and then SEL (or

SELECT).

• To exit from this screen without changing settings,

press MEMO (memory).

Push select to delete

KT_SR3000_15_25.p65

05.8.22, 2:07 PM