John Mills Titanium Hair Straightener - Manual (Page 10)

10 - Titianium Hair Straighteners
Cleaning and Maintenance
• The appliance must be switched off and unplugged
from the electricity supply before cleaning.
• Do not touch the titanium plates for at least 30
minutes after turning off. Wipe with a damp cloth
to clean the titanium plates.
• Let the appliance cool down before touching or
cleaning the body.
• Clean the body with a damp cloth.
• Do not use harsh detergents, abrasives, solvents
or cleaners. Never immerse in water to clean.
• Do not replace the mains supply lead into
the appliance – always use an authorised
representative or qualified electrician.
Disposal and the Environment
If your electrical appliance requires replacement
or is of no further use, please think of protecting
the environment. Contact you local authority for
advice as many have facilities for environmentally
safe disposal.
Connection to Power
Mains Plug / 13 Amp Plug
The unit is fitted with a standard UK mains 3 pin plug.
If the mains lead gets damaged it must be replaced
by a qualified electrician. If you have to change
the plug because the standard plug is damaged or