Receiving fm stations with rds, Changing the rds information, Searching for programs by pty codes (pty search) – JVC CA-UXH10 User Manual
Page 15
12
RDS (Radio Data System) allows FM stations to send an
additional signal along with their regular program signals.
For example, the stations send their station names, as well as
information about what type of program they broadcast, such
as sports or music, etc.
When tuned in to an FM station which provides the RDS
service, the RDS indicator lights up on the display.
With the unit, you can receive the following types of RDS
signals.
PS (Program Service):
Shows commonly known station names.
PTY (Program Type):
Shows types of broadcast programs.
TEXT (Radio Text):
Shows text messages the station sends.
More about RDS
• Some FM and AM (MW) stations do not provide RDS signals.
• RDS services vary among FM RDS stations. For details on RDS
services in your area, check with local radio stations.
• RDS may not work correctly if the received station is not
transmitting the signals properly or if the signal strength is weak.
Changing the RDS Information
You can see RDS information on the display while listening
to an FM station.
On the remote control ONLY:
Press REMAIN/RDS MODE.
• Each time you press the button, the display
changes to show the following information:
• If no PS, PTY, or TEXT signals are sent by a station
“NO PS,” “NO PTY,” or “NO TEXT” appears on the display.
• On the characters displayed
When the display shows PS, PTY or TEXT signals:
–The display shows upper case letters only.
–The display cannot show accented letters; for example, “A” may
represent accented “A’s” like “Б, В, Г, А, Д and Å.”
Searching for Programs by PTY Codes
(PTY Search)
One of the advantages of RDS is that you can locate a
particular kind of program by specifying the PTY codes.
• For details on the PTY codes, see below.
• There is a time limit in doing the following steps. If the
setting is canceled before you finish, start over from step 1.
Receiving FM Stations with RDS
REMAIN
/RDS MODE
INTRO
/RDS SEARCH
PS
(Program Service)
PTY
(Program Type)
TEXT
(Radio Text)
Station frequency
(or preset channel no.)
Classification of the PTY codes for some FM stations
may be different from the above list on this page.
Description of the PTY codes:
NEWS:
News.
AFFAIRS:
Topical program expanding or enlarging upon the news—
debate, or analysis.
INFO:
Program the purpose of which is to impart advice in the
widest sense.
SPORT:
Program concerned with any aspect of sports.
EDUCATE:
Educational programs.
DRAMA:
All radio plays and serials.
CULTURE:
Programs concerning any aspect of national or regional
culture, including language, theater, etc.
SCIENCE:
Programs about natural sciences and technology.
VARIED:
Used for mainly speech-based programs such as quizzes,
panel games and personality interviews.
POP M:
Commercial music of current popular appeal.
ROCK M:
Rock music.
EASY M:
Current contemporary music considered to be “easy-
listening.”
LIGHT M:
Instrumental music, and vocal or choral works.
CLASSICS:
Performances of major orchestral works, symphonies,
chamber music, etc.
OTHER M:
Music not fitting into any of the other categories.
On the remote control ONLY:
1
Press INTRO/RDS SEARCH until
the PTY code you want appears on
the display.
• Each time you press the button, the PTY
codes change as follows:
NEWS
= AFFAIRS = INFO = SPORT =
EDUCATE
= DRAMA = CULTURE =
SCIENCE
= VARIED = POP M = ROCK M =
EASY M
= LIGHT M = CLASSICS =
OTHER M
= (back to the beginning)
2
Press
¢ or 4.
The unit searches FM stations,
stops when it finds the one you
have selected, and tunes in that
station.
• If no program is found, the unit returns to the last
received station.
To stop searching any time during the process, press
INTRO/RDS SEARCH while searching.
UX-H10[B]_RDS.p65
03.5.15, 4:30 PM
12