JVC CA-MXGA3V - Manual (Page 33)

30
Using the Microphone
English
To Apply Digital Echo
Press the ECHO button on the Remote Control.
The Echo indicator (
) comes on.
To cancel the ECHO, press the ECHO button again. The Echo
indicator goes off.
• To prevent howling and squealing (feedback) when using
the microphone, adjust the volume properly. Also, try to
avoid to pointing the microphone towards the speaker.
To Record Your Singing
1 Follow the steps in “Singing Along with
Karaoke” above.
2 Prepare a tape and source, then press the
REC START/STOP button on the Unit.
For details, see “Standard Recording” on page 22.
Microphone Mixing
When using special Karaoke sources for Karaoke, use the follow-
ing procedure.
1 Turn the MIC LEVEL control on the Unit to
MIN.
2 Connect a microphone by plugging it into the
MIC jack.
3 Start a source CD, tape, or other equipment.
4 Adjust the volume, as you sing into the
microphone.
To adjust the volume, use the MIC LEVEL control and VOL-
UME control on the Unit or the VOLUME +,- button on the
Remote Control.
• When you want to apply echo to the microphone, press
ECHO button on the Remote Control. The Echo indicator
(
) will come on.
To Record Microphone Mixing
1 Follow the steps in “Singing Along with
Karaoke” above.
2 Prepare a tape and source, then press the
REC START/STOP button on the Unit.
For details, see “Standard Recording” on page 22.
Playing the Microphone Sound
through the Speakers
You can directly output the microphone sound from the speakers.
1 Turn the MIC LEVEL control on the Unit to
MIN.
2 Connect a microphone by plugging it into the
MIC jack.
3 Adjust the volume, as you sing into the
microphone.
To adjust the volume, use the MIC LEVEL control and VOL-
UME control on the Unit or the VOLUME +,- button on the
Remote control.
• When you want to apply echo to the microphone, press
ECHO button on the Remote Control. The Echo indicator
(
) will come on.
Recording from the Microphone
1 Follow the steps in “Singing Along with
Karaoke” above.
2 Prepare a tape and source, then press the
REC START/STOP button on the Unit.
For details, see “Standard Recording” on page 22.
No echo is applied. An echo is applied.
MX-GA3V(US).book Page 30 Thursday, April 10, 2003 9:45 AM