JBL Century Gold - Manual (Page 10)

The
Century Gold
loudspeakers can be connected by one of several
methods. The binding posts on the rear panel of the
Century Gold
will accept most types of audio cable and connectors, including banana
plugs and bare wire (Figure 6). Follow the hookup method that best
describes your system.
1. For each channel, connect the red (+) terminal on the
Century Gold to the red (+) terminal on your amplifier.
2. For each channel, connect the black (-) terminal on the
Century Gold to the black (-) terminal on the amplifier.
Connecting the systems in this manner ensures that they will operate in
phase; that is, they will work together rather than in opposition.
Connecting the speaker system out of phase will not cause damage but
will adversely affect the speaker’s sound.
No.
8
Speaker Connections
LOW FREQUENCY
HIGH FREQUENCY
LOW FREQUENCY
JBL INCORPORATED
8500 BALBOA BLVD. NORTHRIDGE, CA USA
HIGH FREQUENCY
JBL INCORPORATED
8500 BALBOA BLVD. NORTHRIDGE, CA USA
Figure 6 Connections
Banana/Spade
Connecting Method
Bare Wire
Connecting Method
LOW FREQUENCY
HIGH FREQUENCY
JBL INCORPORATED
8500 BALBOA BLVD. NORTHRIDGE, CA USA
Figure 7 Standard
Connecting Method
Standard Connections (Figure 7)
final cg om 5-15 7/20/98 1:15 PM Page 12