Jensen JE2608WV - Manual (Page 29)

29
Application
Customizing the CHANNEL Settings
Select TV source for example. (Press SOURCE button to select TV mode)
1. Press the POWER button to turn the LCD TV on.
2. Press the MENU button on the remote control to display the Main menu, and use the LEFT and RIGHT
buttons to select the CHANNEL.
3. Use the UP and DOWN buttons to highlight an individual CHANNEL option, use the LEFT and RIGHT
buttons to change the setting, and press the MENU or EXIT button to exit.
The CHANNEL menu includes the following options :
Antenna Allows you to select between Air and Cable.
Auto Scan Use Down button to highlight “Auto Scan”, then press RIGHT or
ENTER button to enter into the following menu.
Setup Lock
12
6
Timer Picture Sound Channel
Auto Scan
Favorite
Show Hide
Channel No
Channel Label
DTV Signal
•
•
• •
•
•
Air
Select Move Exit MENU
50 3 •
KOCE• LB
Good
Setup Lock
12
6
Timer Picture Sound Channel
Cable System
Start to Scan
Auto
Select Move Exit MENU
If you select “Air” as input signal in Antenna , you can press RIGHT or
ENTER button to search the channels automatically.
The receivable channels will be stored automatically.
When searching channels, press MENU to stop.
Setup Channel
Select Exit MENU
Picture Sound
12
6
Timer Lock
RF CH
Found
7
4
Air/Cable
NEXT