Jacuzzi Bellavista Y890 - Manual (Page 2)

Bellavista
™
5.5
Whirlpool Bath
technical Specifications
DimenSionS
66” L x 42” W x 26” H
(1676 mm) L x (1067 mm) W x (660 mm) H
Drain/overfloW
A: 20” (508 mm) B: 11-3/4” (298 mm)
Cutout
Template Provided P/N P187000
total Weight
EE15: 1078 lb (489 kg) / 56 lb/sq. ft. (273 kg/m
2 )
Y890: 1078 lb (489 kg) / 56 lb/sq. ft. (273 kg/m 2 )
operating gallonage
85 U.S. Gal. (322 Liters)
proDuCt Weight
EE15: 120 lb (56 kg)
Y890: 120 lb (56 kg)
Skirt mounting
Not Available
eleCtriCal SpeCifiCationS — model ee15 only
requires a dedicated gfCi protected separate circuit.
Motor/Pump: 120 VAC, 20 AMP, 60 Hz.
RapidHeat™: 120 VAC, 15 AMP, 60 Hz.
heater (StanDarD) — model ee15 only
requires a dedicated gfCi protected separate circuit.
RapidHeat™: P/N S750000
© 2007 Jacuzzi Whirlpool Bath • 14880 Monte Vista Avenue • Chino, CA 91710 • www.jacuzzi.com
inStallation noteS
Refer to installation instructions included with fixture before
beginning installation. Please confirm product availability and
specifications before commencing with any installation work.
PRODUCT SPECIFICATIONS AND AVAILABILITY ARE SUBJECT
TO CHANGE WITHOUT NOTICE.
#FQ84000 10/07
ee15 Bellavista ™ 5.5 Whirlpool Bath, Right Hand
Y890 Bellavista ™ 5.5 Bath
• Center Drain Location
• Accessories / Hardware:
AccuPro™ Ring Kit: #M952
AccuPro™ Ring Kit: #J869
2 x Neck Jet Ring Trim Kit: #P556
Oval Trim Kit: #N557
Rotary Drain Kit, 30” Cable: #K606
• Trim Kit Finishes Available:
(827) – Chrome
(898) – Brushed Chrome
(815) – Satin Nickel
(829) – Bright Brass
(805) – Platinum
(826) – Brushed Nickel
(845) – Oil Rubbed Bronze
Bellavista
™
5.5
Soaker Bath
10" 35-1/2"
11-3/4"
6"
30-1/8"
42"
66"
4" x 4"*
DRAIN/OVERFLOW
A
B
END VIEW SIDE VIEW
2"
L W
H (Heater)
(Motor)
(51 mm)
MAX. 1/2"**
product Shown: Bellavista™ 5.5 Bath
right hand Shown, model: ee15
* Measurements inside unit represent cutout in
floor to allow for drain/overflow.
Minimum Service Access dimensions given.