JVC GR-DLS1 - Manual (Page 36)

36
EN
MANUAL
PAUSE
W H FOCUS
EXPOSURE
AUTO
OFF
OFF
AUTO
AUTO
W. BALANCE
FADER
/ WIPE
P. AE
/ EFFECT
RETURN
4
FADER / WIPE
FADER – BLACK
FADER – B.W
WIPE – SHUTTER
RANDOM
OFF
FADER – WHITE
P
R ?
W H
B K
B W
WIPE–CORNER
SEL. 4
A
M
5S
OFF
PLAY
RECORDING Advanced Features (Cont.)
FADE/WIPE Effects
IMPORTANT:
● When the Digital Image Stabilizer is activated, the Fade/Wipe Effects are not available.
● If certain P.AE/Effects (
੬
pg. 42) are activated or if the Progressive Dial is set to "VIDEO", some Fade/
Wipe Effects cannot be used. If you select a Fade/Wipe Effect that is unusable in the current situation,
the indication blinks.
Use these to spice up the transition from one scene to the next. You can also vary transitions from scene to
scene. Refer to pages 36 – 41 for Fade/Wipe effects and techniques.
Select any one effect from the Fader/Wipe Menu.
1 SELECT OPERATION MODE
First turn the Power Dial to “ M ” while pressing
down the lock button located on the dial,
make sure the LCD monitor is open fully or the
viewfinder is pulled out.
2 ACCESS MANUAL MODE ITEM
MENU
Press the Select Dial.
3 ACCESS FADER/WIPE MENU
Move the pointer and highlight bar to “FADER/
WIPE” by rotating the Select Dial and then
press it. The Fader/Wipe Menu appears.
4 SELECT EFFECT
Move the pointer and highlight bar to the
desired effect by rotating the Select Dial, then
press it.
•The Fader/Wipe Menu disappears and the
effect is reserved. The indicator representing
the selected effect appears.
5 START RECORDING
Press START/STOP to start recording and
activate fade- or wipe- in
OR . . .
END RECORDING
Press START/STOP to end recording and
activate fade- or wipe- out.
6 TO CANCEL FADE/WIPE EFFECTS
In step 4, move the pointer and highlight bar to
“OFF”. Press the Select Dial.
Lock button
Power Dial
Display
Fader/Wipe Menu Manual Mode Item Menu
START/STOP button
Select Dial